Fuel-Additives

Injection system – Protection cleans outstandingly while optimizing running performance. Improves start up behaviour and full load operation. Ensures even and quiet idling.

Property

• no transport of hazardous materials!
• dissolves and disperses deposits and residues
• optimizes engine performance
• increases operating safety
• ensures uniform combustion process
• improves exhaust value
• dehydrating
• anti-corrosion properties

Areas of application

For cleaning the entire system from tank to combustion chamber. Prevents deposits in the fuel system keeps the engine clean, burns more pollution-free, uses less petrol and is thus more environmentally friendly For problems with running performance during cold start, petrol change or with poor exhaust values. Prevents damage from corrosion.

Injection system – CGI protection concentrate cleans outstandingly while optimizing the running performance. Improves start up behaviour and full load operation. Ensures even and quiet idling. Lubricates the entire fuel system and reduces wear.
Especially developed for direct injection engines, however also suitable for normal injection systems.

Property

• dissolves and disperses deposits and residues
• lubricates the injection system and cylinder wall
• improves engine performance, reduces the fuel consumption
• increases operating safety
• ensures uniform combustion process
• improves CO value
• dehydrating

Areas of application

For cleaning the entire system from tank to combustion chamber. Prevents deposits in the fuel system keeps the engine clean, burns more pollution-free, uses less petrol and is thus more environmentally friendly For problems with running performance during cold start or with poor exhaust values. Reduces wear.

Octane booster increases the octane ratings in fuels with low octane ratings or for engines with increased octane rating consumption. Removes and prevents deposits on valves, combustion chambers and exhaust gas recirculation valve. Protects valve seats when using lead-free petrol. Improves start up behaviour and full load operation. Ensures even and quiet idling. 

Properties

• increases octane number of 3-4 points
• dissolves and disperses deposits and residues
• protects valve seats from extreme wear
• ensures uniform combustion process, improves exhaust value.
• selected active ingredient combination optimizes engine performance and increases operational reliability
• dehydrating
• anti-corrosion properties

Areas of application

For fuels with low octane ratings or for engines with increased octane rating consumption. For protection of valves/valve seats with lead-free petrol, also if the valves/valve seats require leaded petrol. During malfunctions in idle, partial load and gas exchange through deposits on injectors, valves and in combustion chambers. Prevents damage from corrosion.

Octane booster FE increases octane ratings in fuels with low octane ratings or for engines with increased octane rating consumption.
Protects valve seats when using lead-free petrol. Improves start up behaviour and full load operation. 

Properties

• increases octane rating depending on fuel up to approx. 3 points
• selected active ingredient combination optimizes engine performance and increases operational reliability
• protects valve seats from extreme wear

Areas of application

For fuels with low octane ratings or for engines with increased octane rating consumption. For protection of valves/valve seats with lead-free petrol, also if the valves/valve seats require leaded petrol.

Valve protectionlead-free protects from wear on valve seats and valves when replacing leaded petrol with unleaded.

Property

• protects valve seats against wear
• reduces valve noises
• light application in the metering container
• can also be used with gas operation ( LPG/CNG )

Areas of application

To protect engines which are designed for leaded petrol and have no hardened valve seats. These engines can be operated with environmentally friendly, unleaded petrol after the addition of Valve Protection -unleaded.

With poor start of the engine and rough idle. 

Properties

• removes deposits on carburettor and throttle valves
• keeping the engine clean improves the exhaust and soot values
• cleaning without dismantling

Areas of application
For deposits on carburettors, throttle valves and in the intake and combustion systems. Brings about an optimum use of energy 
Cleans the throttle valve area without dismantling.

Application
Remove air intake hose or air filter from carburettor / injection unit. With slightly increased speed, spray with several short bursts evenly over all surfaces of the carburettor and rinse off dirt. When the engine is stopped, clean the underneath of the throttle valve as well.

Injection Cleaner cleans outstandingly while optimizing running performance. Selected raw materials for cleaning valves and valve seats. Cleans injectors and carburettors and the entire combustion chamber.

Property
dissolves and disperses deposits and residues
Improves engine performance and octane number requirement
increases operating safety
ensures uniform combustion process
improves CO value

Areas of application

For cleaning the entire injection system. Prevents deposits in the fuel system For problems with running performance during cold start or with poor exhaust values.

Application

Fill active ingredient into a pressure vessel and mount on the fuel supply of the carburettor/injection system. Set pressure and start engine. Run engine at idle until the material is used up, increase speed occasionally ( approx. 1800 rpm).

With poor compression, knocking and overrun of the engine. For security after each carburettor repair.

Properties

• removes deposits on valves, valve seats
• cleans in case of poor compression, engine performance and to troubleshoot valve seats
• removes residues in carburettors on valves, spark plugs and in combustion chambers
• keeping engine clean improves the CO value
• improves compression, and thus reduces fuel consumption
• protects the engine and tank from corrosion even after extended standstill times

Areas of application

For deposits on valves and in the intake and combustion systems. Brings about an optimum use of energy

​

Diesel system protection contains selected active ingredient combinations. These dissolve and disperse deposits and residues, such as oil carbon and soot, optimize the engine performance and increase the operating safety. Ensures the lubrication effect of the injection pump with low-sulphur diesel fuel. Can be used in all diesel engines, even in new commonrail and injection pump engines. 

Property

• cleans the entire system from tank to combustion chamber
• prevents deposits in the injection system and on the injectors
• keeps the engine clean, burns more pollution-free, uses less diesel fuel and is thus more environmentally friendly
• improved cold start behaviour and less smoke development due to increase in cetane number
• reduces the wear on injection systems and pumps by using lubricant additives, especially for low-sulphur diesel fuel
• anti-corrosion properties and de-foaming effect
• dehydrating

Areas of application

Improves start up behaviour and full load operation. Increases the operating safety of low-sulphur diesel fuel. Ensures uniform injection pressure and quiet idling. Reduces smoke development. For problems with running performance during cold start, petrol change or with poor exhaust values. Prevents damage from corrosion.

Diesel Smoke Stop contains selected active ingredient combinations. These reduce the soot output, reduces exhaust gases and improves engine performance. Dissolves and disperses deposits and residues such as oil carbon and soot. Burns soot particles in DPF filters. Increases operating safety Can be used in all diesel engines, even in new common rail and injection pump engines. 

Property

• cleans the entire system from tank to combustion chamber
• reduces emissions
• improves the storage stability of the diesel
• prevents deposits in the injection system and on the injectors
• keeps the engine clean, burns more pollution-free, uses less diesel fuel and is thus more environmentally friendly
• improved cold start behaviour and less smoke development due to increase in cetane number
• anti-corrosion properties and de-foaming effect
• reduces soot particles due to post-combustion in DPF filters

Areas of application

For diesel vehicles with higher running performance that form stronger soot. For tractors, lorries and diesel forklifts. With poor cold start and idle fluctuations. Increases the operating safety of low-sulphur diesel fuel. When the DPF warning lamps light up or for prevention.

Diesel Cetan+ is an additive for improving the combustion quality of diesel fuel.

Property

• reduces cold start smoke
• reduces non-smooth cold start running
• reduces cold start knocking
• facilitates the cold start
• improves running performance

Areas of application

Cetan+ is used for problems with diesel fuel having insufficient additives.
Cold start problems are lessened , smoke and cold start knocking are reduced in engines with high running performance.

Combination of highly effective synthetic components for improvement of the flow properties and the filtering action of middle distillates such as diesel fuel and type EL heating oil at low temperatures. 

Areas of application

For avoiding malfunctions due to paraffin separation at low temperatures and with summer diesel. Ensures reliable cold start. Optimizes engine performance

Air Intake Cleaner Diesel contains selected active ingredient combinations. These disperse deposits and residues, such as oil carbon and soot, in the intake systems of diesel engines. This reduces the load of the particulate filter (DPF) and exhaust gas recirculation valve (EGR) and improves the combustion and driving characteristics.

Property

• reduces deposits in the intake system
• cleans the inlet valves

Areas of application

For deposits and residues such as oil carbon and soot in the intake system of diesel engines. For deposits on inlet valves.